Tel: 0086-577- 62600386 62602786
Fax: 0086-577-62600796
Skype：+8613736310909
E-mail:xk@cnxiya.com
WhatsAPP：+8613736310909
Website: http://www.cnxikai.com
Download sample：
SKYPE：+8613736310909
Wechat：+8613736310909
WhatsAPP：+8613736310909
Viber：+8613736310909
E-mail：xk@cnxiya.com
QQ:195457709
wechat：xiyapower
Dingtalk：+8613736310909
Tags :
33kv Length 787mm 1A Various Removable Button Head K Type Fuse Elements Fuse Links
Meet all applicable Standards ANSI/NEMA
Type K and Type T fuse links are made in complete accordance with standards ANSI/NEMA. Other links meet all the standards except those covering time-current characteristics. Time-current characteristics for links other than K and T links are not covered in the ANSI standards.
Precision — The standard of JEC fuse links
fuse links assure system protection because they are precision manufactured. The fusible materials used in JEC Fuse Links are under continual control during manufacture. Pre-tested to guarantee their electrical values, these materials are held to precise tolerances. At critical points during the manufacturing process, rigid inspections are made.
Packaging
fuse links come in protective plastic bags with perforations to facilitate quick, easy opening even when lineman’s gloves are worn. Each bag remains completely sealed for all-weather protection and keeps the links protected in the line truck’s bins.
Type and amperage is printed on each bag, for easy identification.
Materials used
The fusible section of the 1 through 3 ampere Type K links consist of a stainless-steel fuse strain wire; the 6 through 10 ampere, stainless-steel strain wire and a copper-alloy fuse wire; 12 through 100amperes, a stainless steel strain wire and a silver-copper fuse wire; 140 and 200 ampere, a silver -copper fuse wire large enough to serve as both strain and fuse wire.
Application
The fast characteristics of Type K fuse links were established by ANSI/NEMA to provide fuse links that would meet existing coordination schemes.
JEC Type fuse links are designed to carry 150% of their rated current without damage to the fuse link itself or the cutout in which it is installed.
This capacityis for special loading situations, such as shorttime over loads and cold load pick-up.
Button head and length
Conforming to all applicable ANSI/NEMA specifications, JEC Type Klinks are available with a removable or solid button head.
Twin Pigtail Type K fuse links
The twin pigtail fuse link is convenient to work with and easier to install in the cutout than conventional single pigtail fuse links. The pigtails attach under the clamp with one on each side of the attachment stud.
High Voltage T , K Type 11kv Fuse Link Used For Expulsion Fuse Cutout
High Voltage Fuse link is normally divided into K type and T type.
Type K fuse link is with 6-8 melting speed, and type T is with 10-13 melting speed.
33kV - 38kV type K fuse link (fuse whip) for Dropout Fuse Cutout.
1) Product Description:
This fuse wires apply to the 33KV - 38kV DROP OUT FUSE. With removable button, fast fuse.
2) Standard:
According to ANSI/IEEE C37.41, C37.42 standard, IEC-282 standard.
Our products conform to IEC-282 standard and ANSI C 37.41; ANSI C 37.42
3) Technical specification:
Rated Current: 1A-300A
Rated Voltage: 33kV - 38kV
Length:787mm
Length can be made according to your requirements.
